SKU: AR-ESP-SD
- Product - ESP8266 WiFi Shield/Micro SD Card Slot
- Voltage Regulation - 3.3-5V DC
- Max Current Output - 500mA
- Output Power - +19.5 dBm
- Graphics - ESP-WROOM-02
₹1482.73
(Including GST)
The WROOM-02 comes pre-flashed with an AT-command firmware, so it can be controlled by any UART/Serial; but it also breaks out and provides command access to all of the ESP8266’s I/O. The shield itself is not limit to AT command, we have breakout most of the IO and you can program the WROOM-02 module directly. Whether you want to add AT commands of your own; or flash custom firmware on the ESP8266, this feature may come in very handy especially with it utilizing the UART pin selectors.
Specifications :
| Product | ESP8266 WiFi Shield/Micro SD Card Slot |
| Graphics | ESP-WROOW-02 |
| Voltage Regulation | 3.3-5V DC |
| Max Current Output | 500mA |
| Output Power | +19.5 dBm |
| Size | 69 x 53 x 10mm |
Features :
- Onboard 3.3V voltage regulator for WROOM-02 module, 500mA max current output.
- Each and every board is preassembled and tested before it is being shipped out to you.
- Support Wi-Fi Direct (P2P), soft-AP.
- Integrated TCP/IP protocol stack.
- Integrated TR switch, balun, LNA, power amplifier and matching network.
- Integrated PLLs, regulators, DCXO and power management units.
- Integrated low power 32-bit CPU could be used as an application processor.
- +19.5dBm output power in 802.11b mode.
- Basically, Rev2.0 utilize WROOM-02 instead of ESP8266-12 as the WiFi module.
Package Include :
1 x Cytron ESP8266 WiFi Shield V2.0 W/ Micro SD Card Slot For Arduino Uno
