SKU: AR-2102-TTL
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
- Byte receive buffer; 640 byte transmit buffer.
₹170.71
(Including GST)
CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Features: Stable and reliable chipset CP2102. USB specification 2.0 compliant with full-speed 12Mbps. Standard USB type A male and TTL 5pin connector. 5pins for 3.3V, RST, TXD, RXD, GND & 5V. Baud rates: 300 bps to 1.5 Mbps Byte receive buffer; 640 byte transmit buffer. Hardware or X-On/X-Off handshaking supported. Event character support Line break transmission. USB suspend states supported via SUSPEND pins. Temperature Range: -40 to +85. Size: 42mm For more information.
Specification:
| TX | Connect to Transmit Pin(TXD) of Micro controller. This pin is RX pin of CP2102 on board |
| RX | Connect to Receive Pin(RXD) of Micro controller. This pin is TX pin of CP2102 on board |
| RST | Normally Unconnected. Reset Pin for CP2102. Initiate a system reset by driving this pin low for atleast 15 µs |
| GND | Should be common to microcontroller ground |
| 3V3 | Optional output to power external circuit upto 50mA |
| 5V | Optional output to power external circuit upto 100mA |
Package includes :
1 x USB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino
